- LED Light Sheet
- LED Strip
- LED Tape Light
- Edge lit LED Rigid Bar
- Backlit LED Rigid Bar
- Rigid LED Strip
- Neon LED Strip
- COB LED Strip
- Lighting Fixture
- LED Light Boxes
- Signage
- Signs & Retail Displays
Reflective sheet
Paste on the back of LGP to reflect light, lower light loss and increase brightness.INQUIRE+The reflective sheet is thin with standard thicknesses of 0.075mm, 0.1mm, 0.21mm, 0.25mm, 0.28mm, 0.3mm, 0.35mm (This product has no adhesiveness). We also call it reflective paper of reflective film.
Color: White
Size: Shipped by rolls or customized sizes as request
The reflective film is a part of the constituent material of the LED backlight module. It is located at the bottom of the backlight module and under the light guide plate.
The reflective film is used as a single-sided light guide or attached to a backlight. The function of the reflective film is to reflect the light leaking through the light guide plate back to the panel side. Suitable for small medium and large size backlight modules, flat panel lamps, light boxes.
Item Type Thickness/mm Width/mm Color Unit Reflective sheet RS-350 0.35 1520/1150 white m2 RS-250 0.25 1520/1150 white RS-188 0.188 1520/1150 white The function of the reflective film is to reflect the light leaking through the light guide plate back to the panel side. Thereby achieving a reduction in light loss.
HANDLING AND STORAGE
1, Handling Technical measures Nothing particular
2, Precautions Nothing particular
3, Safe handling advice Nothing particular
4, Storage Technical measures Nothing particular
5, Incompatible products Not data
6, Suitable storage conditions
Products should be stored in its original packing box
Storage in clean room environment (23℃±5℃,50%±10%RH)
Avoid the direct sun light
7, Storage conditions to be avoided Away from direct sunlight, and protected
FIRE FIGHTING MEASURES
1, Ignition point N/A
2, Natural igniton point N/A
3, Proper fire extinguisher Form, water, carbon oxyde, carbon, podwer
4, Improper fire extinguisher N/A
5, Toxidity There is no polymerization reaction
6, Additional information There is no risk of fire and explosure
- LED Strip
info@seglite.com
